A new approach to efficiently fuse different polymers

Cross-linked polymers are structures in which large molecular chains are linked together, conferring exceptional mechanical properties and chemical resistance to the final product. However, their modification is not easy. Now, scientists at Tokyo Institute of Technology have developed a method that allows the fusion of different polymers together easily, allowing the precise tuning of the properties of the final material by selecting appropriate base polymers and mixing them at the right proportion.

Polymers can be found all around us, and also within us. DNA and proteins are some familiar natural polymers. In contrast, synthetic polymers, such as plastics, were first produced about a century ago, but have since found their way into our everyday lives because of their numerous properties. Polymers can be tailored according to their constituent subunits to confer them with many desirable characteristics, such as mechanical strength, stretchability, permeability, and so on.

The problem of cross-linking polymers

Another way to obtain even more functionalities in polymers is by cross-linking them. Cross-linked polymers (CPLs) are polymers that are linked together using special cross-linker molecules. Certain CPLs exhibit outstanding properties due to their interlocked tridimensional structures. Recently, a research team from Tokyo Institute of Technology (Tokyo Tech) led by Professor Hideyuki Otsuka has achieved a breakthrough in this field: they managed to cross-link different CPLs together through an unprecedented approach. “The development of a novel method to fuse different CPLs would bring a revolution in the field, as their mechanical properties can be easily and systematically tuned in an operationally simple process,” explains Otsuka.

A new method: the use of the linker molecule BiTEMPS

The researchers achieved this goal by switching things up in the cross-linker molecule they used. For a CPL to have self-healing capabilities, the polymers have to be joined by what is known as dynamic covalent bonds. These bonds also allow for fusing different types of CPLs, but the carbon molecules used in currently available linkers are prone to oxidizing, which complicates the fusion and processing of CPLs in bulk. The research team employed a linker molecule, called BiTEMPS, that cross-links polymers through a central sulfur-sulfur (S-S) covalent bond. This bond can be temporarily cleaved in half at temperatures higher than 80°C, which allows for exchange among different polymer at the free ends, called TEMPS radicals. Through this cleaving and re-joining process, different CPLs can be fused together. TEMPS radicals are highly stable against oxygen, meaning that all the processing can be done without requiring oxygen care.

A significative advance for the sector

To prove the usefulness of their approach, the researchers cross-linked two types of CPLs, one of them much more elastic than the other. By hot-pressing their mixture, they managed to fuse the CPLs together, and the mechanical properties of the final material were dependent on the ratio of the raw CPLs used. “The mechanical properties of the fused samples could be widely tuned to make them as soft and elastic as desired. As the variety of available polymers is almost infinite, it should be possible to generate materials that exhibit a broad spectrum of physical properties using our method by judiciously choosing appropriate polymer compositions and mixing ratios,” concludes Otsuka. This innovative method will significantly advance the field of CPLs, allowing for the development of highly tailored materials for specialized applications.

Source : Tokyo Technology University  ̶  The news is adapted with editorial change by Compositi magazine

Picture : On the top. The proposed BiTEMPS linkers become cleaved at the S-S covalent bond at >80°C. After cooling, the TEMPS radicals join once again, allowing for the fusion of different cross-linked polymers. Credit: Angewandte Chemie


Leggi anche

Automobili Lamborghini

Automobili Lamborghini in collaborazione con lo Houston Methodist Research Institute ha sviluppato materiali compositi in fibra di carbonio che sono saliti a bordo della Stazione Spaziale Internazionale e sono decollati per lo spazio esterno lo scorso novembre. Lamborghini ha inviato componenti sviluppati e prodotti internamente alla ISS per scopi scientifici…

Leggi tutto…

Un gruppo di ingegneri dell’Università del Delaware (USA) ha sviluppato una nuova tecnologia di stampa 3D che consente la produzione flessibile e a basso costo di componenti in compositi fibrorinforzati utilizzando fibre di carbonio continue e polimeri termoindurenti…

Leggi tutto…

Un consorzio di cinque ricercatori egiziani ha sviluppato fibre e rinforzi ad alte prestazioni estratti dai sottoprodotti della potatura delle palme da dattero, come fronde e rami di frutta. Questo tipo di fibra non è solo sostenibile, ma garantisce anche bassi costi di produzione, è compatibile con la lavorazione di tessuti e materiali compositi e possiede le proprietà necessarie per essere impiegata nelle auto del futuro…

Leggi tutto…

ICN2 spray-drying

Il gruppo di ricerca Supramolecular NanoChemistry and Materials dell’ICN2 (Spagnaha ampliato il campo di applicazione della tecnica dello spry-drying, la tecnica di essicamento a spruzzo delle sospensioni liquide, dimostrando anche che è un metodo adatto per produrre strutture metallo-organiche (MOF) e strutture organiche covalenti (COF), nonché i loro composti…

Leggi tutto…

Aperte le iscrizioni per la Scuola Estiva Materiali Compositi 2020

Quest’anno la Scuola Estiva Materiali Compositi si svolgerà online e in collaborazione con Compositi Magazine e la piattaforma Compositi Live Webinar. L’evento si svolgerà in tre sessioni pomeridiane nelle giornate del 15, 16 e 17 settembre. È possibile iscriversi sia a una sola sessione, che a due o a tutte e tre. Iscriviti ad ogni sessione a cui vuoi partecipare, effettuando una singola registrazione per ciascuna. L’iscrizione verrà ritenuta valida una volta ricevuta la contabile del bonifico….

Leggi tutto…