Fraunhofer IPT Augmented reality system for manufacturing FRP

Augmented reality system facilitates manual manufacturing of products made of FRP

The manufacturing of products made of fiber-reinforced plastics (FRP) often still involves a number of manual work steps: the position and orientation of the semi-finished fiber-reinforced materials must be aligned precisely by hand to ensure that the product has the required levels of stability and flexibility after lamination and curing. Ultimately, this is the only way of enabling the user to fully exploit the advantages of the FRP material. To support the manual deposition process, known as preforming, the Fraunhofer Institute for Production Technology IPT in Aachen, Germany, has developed an intuitive software for commercially available augmented reality glasses: the system specifies the correct deposition of the semi-finished materials as a virtual representation on the mold and can thus significantly improve the quality and performance of FRP production processes.

 

The state of the art

For the draping operation of semi-finished fiber materials for component manufacturing and repair, information on the position and orientation of the fiber layers has so far been provided in the form of plybooks: small and medium-sized companies frequently work with printed paper instructions and are highly dependent on the experience of the person performing the work. Larger companies, for example in the aerospace industry, have already turned to laser projection systems which project the position of the semi-finished product onto the mold. These assist the staff to position the semi-finished materials appropriately. However, such laser-based support systems are comparatively expensive and inflexible in their application.

 

Digital instructions and documentation directly on the component

The Fraunhofer IPT has developed an alternative to these two working aids as part of the Fraunhofer “Smart-Lay-Up!” project: Augmented reality software that uses commercially available smart glasses to make the exact alignment and positioning of the semi-finished materials directly visible on the component. The cutting of the semi-finished materials is also supported by projection of target contours. This cost-effective system is much more flexible in terms of handling than conventional procedures using paper or laser-based projection systems and is also fully scalable in the production environment, making it suitable for the serial production of FRP products.

The application developed by the Fraunhofer IPT provides the worker wearing the smart glasses with much more than just a digital version of the plybook: it also offers an augmented reality environment in which the information for aligning the fiber layers or pre-impregnated fiber prepregs is placed directly above the component in front of them. Step-by-step instructions guide the worker through the preforming process and, if required, document the work for quality assurance purposes.

The software can be easily installed as an app on data glasses with an Android operating system and can be adapted for the lay-up task in hand. Companies wishing to try out and use the technology can now test the app in a feasibility study with their own production staff and identify individual requirements in collaboration with Fraunhofer IPT employees.

 

Cost-effective system for manufacturers of individual lightweight products

The Aachen researchers predict that the new technology will improve the accuracy and traceability of the processing of components made of fiber-reinforced high-performance materials, reduce the error rate and significantly shorten process times. The acquisition of the smart glasses-based system, which costs less than a tenth of the costly laser projection systems, will thus also become affordable for small and medium-sized companies and can lead to noticeable productivity improvements in markets such as medical technology, boat building, mechanical engineering, but also in the manufacture of upmarket consumer products made of fiber-reinforced lightweight materials.

 

Featured image: The Fraunhofer IPT has developed software for commercially available smart glasses that specifies the correct deposition of the semi-finished materials as a virtual representation on the mold – © Fraunhofer IPT

Source: Fraunhofer IPT


Leggi anche

ASICS METASPRINT

Gli scienziati dell’ASICS Institute of Sport Science di Kobe hanno sviluppato una nuova tecnologia CFRTP (Carbon Fiber Reinced Thermoplastics). In stretta collaborazione con un team di partner intersettoriali, hanno scoperto un nuovo utilizzo dei materiali compositi per far avanzare lo sviluppo di scarpe da pista per velocisti…

Leggi tutto…

EU imposes tariffs on Chinese makers of glass fibre fabric in China and Egypt

L’Unione europea ha imposto tariffe ai produttori cinesi di tessuti in fibra di vetro in Cina ed Egitto dopo aver scoperto che questi hanno beneficiato di sussidi ingiusti che hanno permesso loro di vendere a prezzi eccessivamente bassi in Europa…

Leggi tutto…

The Brainstorm project: rail vehicle frame

Sotto la spinta delle sfide del settore ferroviario per l’industria e il mondo accademico, e cioè ridurre i costi e le emissioni di carbonio e migliorare la capacità e la soddisfazione del cliente, il progetto BRAINSTORM ha sviluppato tubi in composito ultraleggeri per la produzione di vagoni ferroviari innovativi, leggeri e modulari, che riducono i costi di produzione e le emissioni di carbonio…

Leggi tutto…

Access panel in recycled thermoplastic composites

All’interno del progetto TPC-Cycle recycling, è stato sviluppato un pannello di accesso per aeromobili in materiale composito termoplastico riciclato ed è stato testato con successo in volo. Il pannello è stato ottenuto utilizzando un nuovo processo di riciclaggio, che ha permesso di rendere il componente più leggero e meno costoso rispetto ai pannelli standard…

Leggi tutto…

Clean Sky 2 NEWCORT project

All’interno del programma Clean Sky 2 finanziato con fondi Horizon 2020, di recente sono stati presentati due progetti che rientrano negli obiettivi generali del programma, ovvero ridurre CO2, emissioni di gas e livelli di rumore prodotti dagli aerei. I due progetti hanno sviluppato rispettivamente una tecnologia per consentire migliori riparazioni per strutture complesse e un prototipo di un sistema di misurazione per monitorare le condizioni degli aeromobili…

Leggi tutto…