Clean Sky: new frontiers for European aviation

Weight and cost reduction in the manufacturing processes and health monitoring of an aircraft fuselage are key to the competitiveness of Europe’s regional aircraft industry. Clean Sky’s Composite Fuselage project is pushing forward the technological frontiers for European aviation.

Clean Sky’s Composite Fuselage project, part of the Regional Aircraft Innovative Aircraft Demonstrator Platform (IADP), aims to develop technologies that are suitable for an advanced regional aircraft fuselage and to integrate and validate them up to full scale demonstrator level. The demonstrators (there are in fact two, one for the structure and one for the cabin interior), are being produced at Leonardo in the form of full-scale fuselage barrels which are representative of a forward fuselage section, just aft of the aircraft cockpit. The project focuses around innovative low cost and low weight composites, advanced manufacturing and assembling processes, and structural monitoring.

«Aircraft affordability is a critical parameter for regional airlines, and in the Composite Fuselage project, technology-wise, we are using a new approach, focusing on the materials and how to integrate all the fuselage’s design elements together with the new doors, new windows, frames and a new floor grid» says Ruud Den Boer, Project Officer at Clean Sky, adding that «production automation is also a very important parameter to support that, manifesting itself in such processes as automatic fibre placement and component integration».

Maintainability is an important factor too, so integrated health monitoring – similar to what is available in road vehicles – is also a consideration within this project: «We are using very small sensors which are integrated into the composite material which can monitor and measure the health of the fuselage, which will help predict when maintenance is required. Embedded sensors in the fuselage will also detect if there is an impact such as a bird-strike or interaction with debris on landings. All of this will lead to the reduction of maintenance costs when eventually used in a production aircraft. But for now, it is a technology development to assess if we can really produce this technology economically», says Den Boer.

The project’s measurable results are already evident: in the first quarter of 2018 the Preliminary Design Review of a fuselage structural demonstrator was successfully completed, leading to the completion of the preliminary design phase. The project is now in the detailed design phase which will end in 2019 with the freezing of the fuselage component models in readiness for manufacturing to commence.

«Two full-scale fuselage demonstrators will be tested: the first one, the Structural Demonstrator, will be subjected to fatigue and static tests; the second one, the Passengers-Cabin Demonstrator, will assess vibro-acoustic, comfort, thermal tests and systems integration – says Vittorio Ascione, who is responsible for Engineering/Structures Analysis and Methods at Leonardo. At the moment, tests on specimens, elements and sub-components have already been carried out, based on the application of the building block approach. And further results will be available through the full-scale demonstrations even if results coming from tests already performed on innovative composite specimens are being used for the design phases». As for the social and environmental benefits, Ascione says that «structural weight and cost reduction goals in the Structural Demonstrator will contribute to reducing CO2 emissions, thanks to lighter structures and more automated and eco-compatible manufacturing and assembly processes. Increased comfort and wellbeing in the passenger cabin demonstrator will contribute to improving the passenger in-f light experience in advanced regional aircraft».

By the end of the project the structural behaviour and the performances in terms of internal noise reduction, passenger comfort and wellbeing are scheduled to be evaluated through full scale tests which will be executed at Leonardo Aircraft Division and at the Fraunhofer Institute.

About Clean Sky | Clean Sky is the largest European research programme developing innovative, cutting-edge technology aimed at reducing CO2, gas emissions and noise levels produced by aircraft. Funded by the EU’s Horizon 2020 programme, Clean Sky contributes to strengthening European aero-industry collaboration, global leadership and competitiveness.

More information: www.cleansky.eu


Leggi anche

Access panel in recycled thermoplastic composites

All’interno del progetto TPC-Cycle recycling, è stato sviluppato un pannello di accesso per aeromobili in materiale composito termoplastico riciclato ed è stato testato con successo in volo. Il pannello è stato ottenuto utilizzando un nuovo processo di riciclaggio, che ha permesso di rendere il componente più leggero e meno costoso rispetto ai pannelli standard…

Leggi tutto…

Clean Sky 2 NEWCORT project

All’interno del programma Clean Sky 2 finanziato con fondi Horizon 2020, di recente sono stati presentati due progetti che rientrano negli obiettivi generali del programma, ovvero ridurre CO2, emissioni di gas e livelli di rumore prodotti dagli aerei. I due progetti hanno sviluppato rispettivamente una tecnologia per consentire migliori riparazioni per strutture complesse e un prototipo di un sistema di misurazione per monitorare le condizioni degli aeromobili…

Leggi tutto…

Le ali sono una delle cause del rumore degli aerei. Quando i dispositivi di alta portanza e le superfici di controllo incontrano l’ala, c’è una brusca transizione tra questi profili alari e l’aria che li circonda verso la parte fissa dell’ala. Studi aerodinamici hanno dimostrato che tali transizioni sono tra le cause del rumore. Una superficie flessibile tra l’ala e le superfici mobili può ridurre il rumore in quest’area? I ricercatori del Centro aerospaziale tedesco (DLR) insieme ad altri enti ha lavorato al progetto FlexMat, che prova a rispondere a questa domanda…

Leggi tutto…

I compositi fibrorinforzati sono ampiamente utilizzati nell’industria aerospaziale e in altre industrie ad alta tecnologia. Comprendere in che modo la loro microstruttura e la forza dell’interfaccia fibra/matrice influenzano le loro proprietà di rottura può aiutare a produrre materiali più resistenti. Un recente studio dell’Università dell’Illinois propone un modello per identificare le sensibilità alla fessurazione (cracking) trasversale, uno dei processi chiave di fallimento dei laminati compositi, nella microstruttura composita…

Leggi tutto…

La tecnologia CFIP (Continuous Fibre Injection Process) è stata sviluppata e brevettata da Eurecat Centro Tecnológico de Catalunya e consente di rinforzare parti in plastica, metalli o ceramica prodotte con stampa 3D con fibre continue in carbonio, aumentandone la resistenza e riducendo il peso…

Leggi tutto…